Doorbell Cam
Has anyone tried this Doorbell cam with SS. Its $139.00 (USD) at checkout when you enter CYBER as the coupon code. Looking for a doorbell cam and its seems TGTBT.
https://www.laviewsecurity.com/product/hd-ip-cameras/video-doorbell-camera.html
https://www.laviewsecurity.com/product/hd-ip-cameras/video-doorbell-camera.html
Comments
I looked through the Support / Q@A section of LaViews`s site and it said it was ONVIF compatible.
They also supplied info about manual setup, whereby you can use the "Manual configuration" profile in SecuritySpy with the RTSP Format setting, with Streaming/Channels/101 as the Request. However, as it supports ONVIF, there should be no need to use manual setup.
If anyone decides to buy this device, please post back here with your experiences.
The coupon code stop working
Day late I Guess. Back to $199.00
This past week Hikvision released a new firmware with a bunch of fixes, plus enabled web access and 'support some important ONVIF protocols'. I've tired to get it working with SecuritySpy once again using every possible configuration, but still no luck. SecuritySpy even auto-detects the incoming stream's via ONVIF.
My only guess why it won't work is a potential conflict with the Hik-Connect service used to receive doorbell notifications and have two-way conversations.
SS Log says:
12/20/2017 21:54:01: Error communicating with the network device "Network camera". 4.2.1,80262,801 Failed to obtain video frame from network device. Data from network device not as expected.
The camera has other issues (like not being able to turn IR off) but this is the big one.
If you are able to put your camera online for us on port 554 and supply us with the address and username and password, we will take a look and see if we can get this to work. If this is possible, please email us the details (we can provide more info about exactly how to set this up too, if required). Thanks.
Mike
https://ipcamtalk.com/threads/sweet-lts-is-releasing-an-onvif-compatible-doorbell-with-sd-card-slot-and-940nm-ir.22155/page-33
Also, using rls. 4.2.8, I could not make the Doorbell camera work with the SS Hikvision profile, needed to use the ONVIF UDP profile. All works well now.
I have this latest hik firmware installed on the camera.
http://www.hikvisioneurope.com/portal/portal/Access Control & Video Intercom/Firmware/Video Intercom/IP Door Bells/Wi-Fi Door Bell/DZ20180521_111_28_H2_EN_STD_V1.4.62_180809.zip
thanks
Can anyone confirm a rough setup guide for this please? I'd like to somehow hook up the button so it works with home assistant (heading over there in a sec) but the video / two way audio is handled through SS.