Error code: 705,-61

merlyn383
merlyn383
edited October 2015 in SecuritySpy
I keep receiving Error code: 705,-61 which causes my cameras to go into passive mode. I've done enough searching to figure out that it's a permissions problem but I can't figure out which folder is the problem. The permissions look correct on /Documents/SecuritySpy/Captured Files and on the final capture destination. I've even tested setting the permissions on the two folders at 777 to test, no dice.

Comments

  • Ben
    Ben
    Hi - yes this is a permissions problem. Please quit SecuritySpy and restart your Mac. Then open Disk Utility and run a "Repair Disk Permissions" procedure on your startup volume. Then open SecuritySpy again and set the cameras back to Active mode.

    Does this fix it?
  • merlyn383
    merlyn383
    Hi Ben - No joy. I also tried deleting ~/Documents/SecuritySpy/Captured Files, figuring that you wrote the system to check for the directory and create it if necessary. I was right and the directory got recreated but it still gives me the same error on restarting SecuritySpy.
  • Ben
    Ben
    This is a strange one! Please can you let me know what Mac OS X system version you are using? Also, have you set up a custom capture destination for the camera in question, or is it set to the default (in which case you will see "Will be created automatically" in the Camera Settings window)?

Categories