iPhone App - Connection failed only on captures

RichardLBR
RichardLBR
in SecuritySpy

The iPhone app connects to my Security Spy app over the local network. The server is discovered automatically, and live view and the list of captures shows correctly.

However when I select a capture to view I get a connection failed - unable to connect to the server error, therefore I cannot view any captures via the iPhone app. The web app works correctly.

I have rebooted my router and Mac. Turned on and off diverting the server over bonjour. Specified my fixed local ip address.

Running 6.21 but also tried 6.21b19

I am running one physical ethernet connection with my main network on vlan 10 (192.168.10.0/24) and cctv network on vlan 40 (192.168.40.0/24)

Comments

  • RichardLBR
    RichardLBR

    Actually Imight now have this working. I set the listen on ip setting to my 10 network and I think that fixed it

Categories