Amcrest camera pan/tilt can't be fine-tuned

nealk
nealk
in Cameras

I just received and installed one of these, my second.

https://amcrest.com/4mp-wifi-camera-pan-tilt-ip4m-1041b.html?srsltid=AfmBOoo0wkEC4AVsop2xviv1nsgA1mm4RJvXXIqAW03X5PsaNtHlpRJm

I can't fine tune the pan-tilt at all. No way to bump it a few degrees left/right/up/down. Will only move in something like 30 degree increments. Tried its web interface, tried various options from within SS. Appreciate any other suggestions.

Comments

  • nealk
    nealk

    Just tried it again and it's better but still not great. Line of sight to router, about 12 feet away.

    Same model, 2 rooms away from router, brick and plaster in between, no problem.

  • Ben
    Ben

    In the Settings tab of the Camera Control window in SecuritySpy you'll find an option to adjust the PTZ speed. Does this solve the problem?

  • nealk
    nealk

    Yes, I mentioned that in OP but perhaps didn't describe it well; changing the speed from within SS had no effect.

Categories