NTP Time Server Installation

duss
duss
in Installation

Just set this up.

Questions

  1. Do I use the MAC IP on my primary network (x.x.1.2) or of my local IP network I set up for the cameras (x.x.2.1)?
  2. The camera NTP servers also have a port, do I ignore the values thats currently in there, delete it, or change it to somethig else?

Thanks

Jim

Comments

  • Ben
    Ben

    Hi Jim,

    You must use the Mac's IP address that is on the camera subnet (so that it starts with the same first three numbers as all the camera IP addresses).

    You can normally leave the port blank, but if you have to enter a port, use 123, which is the default NTP port.

  • duss
    duss

    Ben

    Thanks!

    Jim

Categories