CMIP3233-S?

cf76
edited June 2014 in SecuritySpy
Hi,
Will the LT Security CMIP3233-S (aka Orange Sources OCMIP3233-S 3 Megapixel) from LTS California camera work with SecuritySpy?
Thanks!

Comments

  • According to the specifications of this camera it supports ONVIF, so it's likely that it will work in SecuritySpy (simply create a new network device, enter the camera's IP address, username/password, and select the ONVIF profile from the list). However, as we haven't tested this camera ourselves (or other cameras from the same manufacturer), we cannot be 100% sure that it will work. If you decide to use this camera with SecuritySpy, please report back.
  • cf76
    edited June 2014
    Hey,
    Thanks for the note. I have been trying various things without success yet. ;-) If I do figure out the correct settings I will follow up here. (The camera itself seems like it is working well and has a nice picture). It always returns a communication error no matter what parameters I use. (e.g. ONVIF port 12001, RTSP port 554 or the defaults). I know it is the correct username and password. The three different "Format" options didn't help. :-)

    ----
    UPDATE:
    I just typed all that and then thought I'd just try the "Manual" settings and turn off ONVIF completely. Lo and behold I have video now! So it WORKS!

    All the default ports worked - just the IP, username and password and RTSP-over-HTTP were required.

    I'm going to play a bit more to make sure it is working, then pay! [It all seems to be working so I just bought it - thanks for the suggestions above]

  • Great to hear you got it working!

    I'm not sure why the ONVIF setting didn't work - if you got a communications error this indicates that possibly the port number entered into SecuritySpy is wrong. SecuritySpy assumes that port 80 is used, however some cameras use a different port for ONVIF. Did you check the camera's user manual for this information?

    In any case, if it's working in manual mode then stick with that!