Annke C800

DuHads
DuHads
edited December 2020 in SecuritySpy
I have a couple Annke C800s set up and mostly working. Anyone know a good profile to use for these is? They supposedly support ONVIF and H265. I've tried the Auto-Detect Profiles button, but mostly what comes up is RTSP H.264.

Comments

  • Ben
    Ben
    ONVIF should be the right profile for this camera - does this work?
  • DuHads
    DuHads
    @Ben, if I choose ONVIF the camera does not connect. If I use UCam247 it seems to work just fine.
  • Ben
    Ben
    OK I'm glad you found a working profile, though it's strange that the ONVIF profile didn't work. There shouldn't be any downside to this, as long as you are getting an H.264 or H.265 stream through from the camera rather than a JPEG stream (you can check for this via the Camera Info window).
  • DuHads
    DuHads
    Well, after some more investigation yesterday I discovered that ONVIF had to be specifically enabled. Did so and now the ONVIF profile works.
  • Ben
    Ben
    Great to hear that, thanks for reporting back.
  • tlutrick
    tlutrick
    I'm in my C800 and don't see anywhere to "enable" ONVIF for the camera. Can you guys elaborate?
  • Ben
    Ben
    edited July 2021
    Hi @tlutrick this should be under Configuration > Network > Advanced Settings, as shown here:

    image

    So you will need to enable ONVIF, then set up an ONVIF user, then give this username/password to SecuritySpy.
  • tlutrick
    tlutrick
    That did it, thanks Ben

Categories