Continuous capture at less than 1 fps
  • Does anyone have a workaround for recording continuous capture movies at less than 1 fps?
  • For the continuous capture frame rate setting, you can enter a number less than one here (e.g. enter 0.5 to capture 1 frame every 2 seconds).

    Also, if your camera is supplying a H.264 video stream (most do): in order for this frame rate setting to be used, you must also enabled the "Recompress video data" option for the camera, under Preferences -> Cameras -> Device (without recomposing the video data, SecuritySpy can't change the frame rate of the video stream so it will be recorded as-is).
  • Thanks very much. That did the trick. I was trying to enter in something ".5" for the frame rate which caused it to just beep and only accept the "5". Seems like "0.5" works fine though.

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!