Amcrest DVR
We been using a Amcrest 960H for our outdoor cameras and the unit finally died. We replaced it with a 8ch (had a 4 before) Amcrest 1080-Lite since we didn't need the cameras or the HD. Can't get it to work with SecuritySpy now. Anyone had any luck with one of these?
And Ben, I know you guys usually don't support low end units like the Amcrest so if it don't work it don't work LOL.
Thanks,
Steve
And Ben, I know you guys usually don't support low end units like the Amcrest so if it don't work it don't work LOL.
Thanks,
Steve
Comments
The Amcrest profile comes back with: Unexpected Data
The Amcrest Qcam, 960 comes back with: Unrecognized Request
The Dahua's profile comes back with: Unexpected Data
I have tried by leaving ports blank, and putting ports in. Username and PW are correct.
Still no go
"channel={CAMNO}&subtype=0&proto=Private3"
Here is how BI has it configured:
https://photos.app.goo.gl/Grh8ZeNYGzMtKTsQ7
Steve
"06/19/2019 09:08:21: Error communicating with the network device "Amcrest DVR". 4.2.11b6,80250,801 Failed to obtain video frame from network device. Data from network device not as expected."
Thanks,
Steve
Steve