Chinese direct x cams
Hi everybody,
Im still trying SS and bought one of those cheap chinese cams (Escam QD300 if Im not wrong).
Im having very regual connection losses, but the cam comes after a sec. or 3. These connections losses are SS (or OSX) related as this is not happening on the PC running the Escam software...
The other strange behavior is that the image freezes randomly on a frame for some time (up to 20 sec) but the motion capture continues. So in other words, the image freezes but SS continues to dedect motion if the motion bar in the camer info is correct.
Any ideas if these problems can be solved
Thanks,
Gilles
Im still trying SS and bought one of those cheap chinese cams (Escam QD300 if Im not wrong).
Im having very regual connection losses, but the cam comes after a sec. or 3. These connections losses are SS (or OSX) related as this is not happening on the PC running the Escam software...
The other strange behavior is that the image freezes randomly on a frame for some time (up to 20 sec) but the motion capture continues. So in other words, the image freezes but SS continues to dedect motion if the motion bar in the camer info is correct.
Any ideas if these problems can be solved
Thanks,
Gilles
Comments
SS version: 4.0.10
To get the log: from the File menu in SecuritySpy, select the "Open Log" option. This should open the log file in TextEdit. Use the "Duplicate" ("Save As") option from the File menu to save this to your Desktop, and then attach the file to your email.
Thanks for your reply. Updating to the latest version of SS solves the problems!
Thanks again,
Gilles