2 PS3 Cams won't work at the same time

pETER68 · August 2015

Hello,

i've installed the demo from SecuritySpy and will use it with 2 PS3 cams.
In the Main video window the software shows only the video from 1 cam. In the other cam window i get only the message "reconnect in..." with a timer, but the video never shows up

In the camera settings both cams are listet (Sony HD Eye for PS3 (SLEH 1 and Sony HD Eye for PS3 (SLEH 00 )
If i choose in the camera settings window the one with no video i get the error message "There was an error while setting up the camera Sony HD Eye for PS3 (SLEH 1" (Error code: 8444,-3001)"

I'm on a Mac Mini 2012 with Yosemite and all updates.

Hope i find help here.

Greetings

Ben · August 2015

This is most likely a bandwidth issue. These cameras are USB 2.0, which has limited bandwidth, with a single camera taking up most of the USB bandwidth when operating at its full resolution and frame rate.

Our blog post USB Cameras and SecuritySpy should give you all the information you need, but please let us know if you have any further questions.

pETER68 · August 2015

Thanks for the Information and the link.

2 PS3 Cams won't work at the same time

Comments