Trio Iguaçu is a talented group of musicians, playing a delightful blend of tango and bossa nova music. We set up a recording session with them in order to produce promotional videos for the trio, as well as to demonstrate the power and flexibility of our CaptureSync multi-camera video recording software.
CaptureSync is software for the Mac that records video and audio from multiple cameras simultaneously, with all feeds synchronised together and saved to a single QuickTime Movie file. CaptureSync is perfect for recording interviews, scientific experiments, psychological research, musical performances, market research, lectures and presentations.
The setup consisted of one main camera to capture the whole group, as well as three auxiliary cameras to provide close-up views of each musician. These close-up views are useful for analysing playing technique or for editing in Final Cut Pro in order to produce an edited movie that switches between multiple camera angles.
As the quality of the group view was the most important, we used a Nikon D3200 DSLR camera with a 35mm lens. This camera provides high-quality 1920×1080 resolution 30fps video via HDMI, which can be recorded by CaptureSync using Blackmagic HDMI input hardware. As we were using a Mac Pro computer, we used the PCI version of their Intensity product, which is part of a range that also includes Thunderbolt and USB 3.0 HDMI-input devices.
Nikon D3200 DSLR Camera
Since our initial 10 Recommended IP Cameras post, network cameras have been improving steadily, with many new models released. Therefore it is time to update the list with our picks for 2015. As before, the cameras listed here are in no particular order (they are quite varied in terms of cost and feature set, which makes them difficult to rank as a “top 10″ list), however they are all cameras that, due to their impressive features, we recommend to our customers for use with our SecuritySpy video surveillance software for the Mac.
Some abbreviations used below for camera features are as follows:
- MP – Megapixels – the number of millions of pixels in the image sensor. The higher this value, the more detailed the image, but note that optical quality of the lens system also makes a huge difference, so resolution isn’t everything.
- PoE – Power-over-Ethernet – when using a PoE switch, the camera draws power over the ethernet cable and therefore doesn’t need a separate power supply. This is very useful for easy installation and ongoing reliability.
- IR – Infra Red – some cameras include Infra Red LEDs (Light Emitting Diodes) for night vision.
- PTZ – Pan Tilt Zoom – mechanical movement of the camera that can be controlled by SecuritySpy.
For a simple high-quality 1.2 MP outdoor bullet camera, this model is ideal. It features PoE and good night vision thanks to its bright IR LEDs, and it is outstanding value at only USD $100. Minor downsides include the lack of audio, and somewhat awkward initial setup (due to pre-set static IP addresses – but we have instructions for the setup in these cases). For a higher-resolution model, have a look at the 2.1 MP IPC-HFW4200S or the 3.1 MP IPC-HFW4300S. Continue reading
SecuritySpy is our flagship video surveillance software product for Mac OS X, and as of version 3.2, SecuritySpy supports the ONVIF protocol. Here are the answers to some common questions, and information about this new feature.
What is ONVIF?
ONVIF is an open industry standard for IP-based video surveillance products. In the past, SecuritySpy would have to be pre-programmed with profiles for each camera it supports, containing information about the supported streaming formats, audio capabilities, communication ports, resolutions, frame rates, Pan/Tilt/Zoom features etc. This is inconvenient and time-consuming for us as developers, and also bad for customers because there is an inevitable delay between a new camera coming on the market and an update to SecuritySpy to officially support it.
With ONVIF, all this information can be obtained from the camera automatically. Therefore, any new ONVIF-compliant camera hitting the market can be immediately used with SecuritySpy using the ONVIF setting built into the software.
NOTE: this post has been superseded by our newer post 10 Recommended IP Cameras 2015.
The IP camera market is changing rapidly, and while we do make some specific camera recommendations in our SecuritySpy Installation Manual, we are always coming across new noteworthy cameras, and there are simply too many to list in the manual. So we have put together our current 10 recommendations for network cameras in this blog post – the cameras described here are in no particular order (they are quite varied in terms of cost and feature set, which makes them difficult to rank in a “top 10” list), however they are all cameras, due to their impressive collections of features, that we recommend to our customers. All the cameras featured here are capable of MPEG-4 and/or H.264 compression, which can be directly recorded by SecuritySpy for optimum quality and efficiency.
1 Dahua Technology IPC-HFW2100